Accueil
[size=48]ViX4E2PROJECT VERSION 2.2 Build 006-blue
[/size][size=48] FOR AMIKO, EVO, VENTON, MUT@NT, ZGEMMA
[/size]ADD 2160p RESOLUTION SUPPORT TO ViX4E2PROJECT
New resolution option settings up to 2160p and 2160p30 for supported receivers or whatever the maximum resolution is your hardware supports! Ready for 4K / UHD support - Mut@nt HD51 is currently the only ViX4E2PROJECT supported receiver capable of supporting these resolution - New option will only be available in supported receivers. Tested with Astra demo 4K / UHD broadcast on 28.2 East.
ADD SUPPORT FOR UHD 2160p AUTOMATIC RESOLUTION TO ViX4E2PROJECT
This is quite a large update to Automatic Resolution settings/options which are pre-built into ViX4E2PROJECT - This now offers support for up to 2160p (where hardware/settings support) and also includes enhancements for other 'non-4K' receivers. Many thanks to OpenATV and specifically iPKay for their work with this.
ADD H.265 / HEVC SUPPORT TO ViX4E2PROJECT
H.265 / HEVC support is now built into ViX4E2PROJECT for those receivers that support this (chipset dependent) for both broadcast and stream (IPTV) services - Mut@nt HD51 and HD1500 are currently the only ViX4E2PROJECT supported receiver capable of supporting this. Tested with demo H.265/HEVC IPTV stream with direct streaming from Enigma2 Bouquet.
INCLUDE FASTSCAN AND CABLESCAN OPTIONS
These options have been included as an optional extra at the request of the manufacturer as they are popular addons in parts of Europe. I have not included this within the firmware as standard as these are not compatible with popular UK providers so didn't wish to cause confusion. For those that want to use either/or of these though they are easily installed from the addons server and included under systemplugins. I would however highly recommend that users who are familiar with these also check out AutoBouquetsMaker which is built into ViX4E2PROJECT by default and covers all and more in terms of supported providers - but the choice is yours!
NEW OPTION IN 'EPG CONFIGURATOR' MENU TO SHOW CHANNEL NUMBER ON EPG
The 'EPG Configurator' menu is now home to all EPG related setup which includes CrossEPG, EPGRefresh, EPG-Importor and all regular EPG settings, where EPG is store, file name, refresh time, provider type EPG etc. This can be accessed at Menu > Setup > System > EPG Configurator. A new option has been added to allow the display of channel number in the EPG (thanks for bbbuk for a large amount of this source code) which adds to previous service name and picon options. This setting is is accessed in the GraphicalEPG settings menu within EPG Configurator, set 'Service Title mode' and 'Use Channel Numbers from specific Bouquet' to your preferred choice - For example in the above screen shot this is set to Channel Number and Service Name and Entertainment.
ADD SUPPORT OF 'SPINNER ALPHABLENDING' TO ViX4E2PROJECT
This is something which is a cosmetic enhancement that removes the 'rough edges' displayed on the Spinner when viewed against certain backgrounds. Many thanks to Peter Urbanec for this source code update enhancement.
ViX4E2PROJECT PANEL INCLUDED
The usual ViX4E2PROJECT panel is included as standard (accessed via Blue Button > ViX4E2PROJECT and/or Menu > Setup > ViX4E2PROJECT). Please note image backup / restore is not currently supported on Mut@nt HD51/Wetek Play / OpenELEC - All MIPS and SH4 based receivers are fully supported and settings backup / restore is supported on ALL ViX4E2PROJECT supported makes and models.
INCLUDE UPDATED SOFTCAM OPTIONS
Make sure you install the correct version for your hardware HD51_ONLY = Mut@nt HD51 (Broadcom ARM based), SH4_ONLY = All SH4 based receivers (Amiko Alien range), WETEK_ONLY = Wetek Play / OpenELEC, MIPS_ONLY = All Broadcom Mipsel based receivers (Basically anything else that's not already been mentioned, EVO, Mutant HD1500/2400, Zgemma, etc). Once the Softcam of any type is installed it needs to be activated in the Softcam Manager which can be accessed at Menu > Setup > SoftCam / CI > Softcam Manager. When activated in the case of OScam the WebIf can then be accessed at "http://ip-adress-of-receiver:8888" NOTE: FURTHER SOFTCAM SUPPORT AND DISCUSSION WILL NOT BE ACCEPTED ON HERE - PLEASE DO NOT ASK!
INCLUDES VARIOUS OTHER PACKAGE UPDATES INCLUDING MANUFACTURER DRIVERS
Various updates are included with this release as usual including several 'under the hood' updates along with any manufacturer driver updates that were available as of Friday September 16th 2016. This update includes quite a number of small updates to both the OE base and Enigma2.
INCLUDES LATEST AVAILABLE BUILD OF AUTOBOUQUETSMAKER
Latest available as of September 16th, 2016 which includes various area updates and now includes more familiar channel numbering as well as option to online update configuration files to keep up to date without the need to uninstall/install
[/size][size=48] FOR AMIKO, EVO, VENTON, MUT@NT, ZGEMMA
[/size]ADD 2160p RESOLUTION SUPPORT TO ViX4E2PROJECT
New resolution option settings up to 2160p and 2160p30 for supported receivers or whatever the maximum resolution is your hardware supports! Ready for 4K / UHD support - Mut@nt HD51 is currently the only ViX4E2PROJECT supported receiver capable of supporting these resolution - New option will only be available in supported receivers. Tested with Astra demo 4K / UHD broadcast on 28.2 East.
ADD SUPPORT FOR UHD 2160p AUTOMATIC RESOLUTION TO ViX4E2PROJECT
This is quite a large update to Automatic Resolution settings/options which are pre-built into ViX4E2PROJECT - This now offers support for up to 2160p (where hardware/settings support) and also includes enhancements for other 'non-4K' receivers. Many thanks to OpenATV and specifically iPKay for their work with this.
ADD H.265 / HEVC SUPPORT TO ViX4E2PROJECT
H.265 / HEVC support is now built into ViX4E2PROJECT for those receivers that support this (chipset dependent) for both broadcast and stream (IPTV) services - Mut@nt HD51 and HD1500 are currently the only ViX4E2PROJECT supported receiver capable of supporting this. Tested with demo H.265/HEVC IPTV stream with direct streaming from Enigma2 Bouquet.
INCLUDE FASTSCAN AND CABLESCAN OPTIONS
These options have been included as an optional extra at the request of the manufacturer as they are popular addons in parts of Europe. I have not included this within the firmware as standard as these are not compatible with popular UK providers so didn't wish to cause confusion. For those that want to use either/or of these though they are easily installed from the addons server and included under systemplugins. I would however highly recommend that users who are familiar with these also check out AutoBouquetsMaker which is built into ViX4E2PROJECT by default and covers all and more in terms of supported providers - but the choice is yours!
NEW OPTION IN 'EPG CONFIGURATOR' MENU TO SHOW CHANNEL NUMBER ON EPG
The 'EPG Configurator' menu is now home to all EPG related setup which includes CrossEPG, EPGRefresh, EPG-Importor and all regular EPG settings, where EPG is store, file name, refresh time, provider type EPG etc. This can be accessed at Menu > Setup > System > EPG Configurator. A new option has been added to allow the display of channel number in the EPG (thanks for bbbuk for a large amount of this source code) which adds to previous service name and picon options. This setting is is accessed in the GraphicalEPG settings menu within EPG Configurator, set 'Service Title mode' and 'Use Channel Numbers from specific Bouquet' to your preferred choice - For example in the above screen shot this is set to Channel Number and Service Name and Entertainment.
ADD SUPPORT OF 'SPINNER ALPHABLENDING' TO ViX4E2PROJECT
This is something which is a cosmetic enhancement that removes the 'rough edges' displayed on the Spinner when viewed against certain backgrounds. Many thanks to Peter Urbanec for this source code update enhancement.
ViX4E2PROJECT PANEL INCLUDED
The usual ViX4E2PROJECT panel is included as standard (accessed via Blue Button > ViX4E2PROJECT and/or Menu > Setup > ViX4E2PROJECT). Please note image backup / restore is not currently supported on Mut@nt HD51/Wetek Play / OpenELEC - All MIPS and SH4 based receivers are fully supported and settings backup / restore is supported on ALL ViX4E2PROJECT supported makes and models.
INCLUDE UPDATED SOFTCAM OPTIONS
Make sure you install the correct version for your hardware HD51_ONLY = Mut@nt HD51 (Broadcom ARM based), SH4_ONLY = All SH4 based receivers (Amiko Alien range), WETEK_ONLY = Wetek Play / OpenELEC, MIPS_ONLY = All Broadcom Mipsel based receivers (Basically anything else that's not already been mentioned, EVO, Mutant HD1500/2400, Zgemma, etc). Once the Softcam of any type is installed it needs to be activated in the Softcam Manager which can be accessed at Menu > Setup > SoftCam / CI > Softcam Manager. When activated in the case of OScam the WebIf can then be accessed at "http://ip-adress-of-receiver:8888" NOTE: FURTHER SOFTCAM SUPPORT AND DISCUSSION WILL NOT BE ACCEPTED ON HERE - PLEASE DO NOT ASK!
INCLUDES VARIOUS OTHER PACKAGE UPDATES INCLUDING MANUFACTURER DRIVERS
Various updates are included with this release as usual including several 'under the hood' updates along with any manufacturer driver updates that were available as of Friday September 16th 2016. This update includes quite a number of small updates to both the OE base and Enigma2.
INCLUDES LATEST AVAILABLE BUILD OF AUTOBOUQUETSMAKER
Latest available as of September 16th, 2016 which includes various area updates and now includes more familiar channel numbering as well as option to online update configuration files to keep up to date without the need to uninstall/install
